The Sun regularly produces energetic outbursts of electromagnetic radiation called solar flares. When these flares are accompanied by flows of plasma, they are known as coronal mass ejections (CMEs). Now, astronomers at the Netherlands Institute for Radio Astronomy (ASTRON) have spotted a similar event occurring on a star other than our Sun – the first unambiguous detection of a CME outside our solar system.

Astronomers have long predicted that the radio emissions associated with CMEs from other stars should be detectable. However, Joseph Callingham, who led the ASTRON study, says that he and his colleagues needed the highly sensitive low-frequency radio telescope LOFAR – plus ESA’s XMM-Newton space observatory and “some smart software” developed by Cyril Tasse and Philippe Zarka at the Observatoire de Paris-PSL, France – to find one.

A short, intense radio signal from StKM 1-1262

Using these tools, the team detected short, intense radio signals from a star located around 40 light-years away from Earth. This star, called StKM 1-1262, is very different from our Sun. At only around half of the Sun’s mass, it is classed as an M-dwarf star. It also rotates 20 times faster and boasts a magnetic field 300 times stronger. Nevertheless, the burst it produced had the same frequency, time and polarization properties as the plasma emission from an event called a solar type II burst that astronomers identify as a fast CME when it comes from the Sun.

“This work opens up a new observational frontier for studying and understanding eruptions and space weather around other stars,” says Henrik Eklund, an ESA research fellow working at the European Space Research and Technology Centre (ESTEC) in Noordwijk, Netherlands, who was not involved in the study. “We’re no longer limited to extrapolating our understanding of the Sun’s CMEs to other stars.”

Implications for life on exoplanets

The high speed of this burst – around 2400 km/s – would be atypical for our own Sun, with only around 1 in every 20 solar CMEs reaching that level. However, the ASTRON team says that M-dwarfs like StKM 1-1262 could emit CMEs of this type as often as once a day.

According to Eklund, this has implications for extraterrestrial life, as most of the known planets in the Milky Way are thought to orbit stars of this type, and such bursts could be powerful enough to strip their atmospheres. “It seems that intense space weather may be even more extreme around smaller stars – the primary hosts of potentially habitable exoplanets,” he says. “This has important implications for how these planets keep hold of their atmospheres and possibly remain habitable over time.”

Erik Kuulkers, a project scientist at XMM-Newton who was also not directly involved in the study, suggests that this atmosphere-stripping ability could modify the way we hunt for life in stellar systems akin to our Solar System. “A planet’s habitability for life as we know it is defined by its distance from its parent star – whether or not it sits within the star’s ‘habitable zone’, a region where liquid water can exist on the surface of planets with suitable atmospheres,” Kuulkers says. “What if that star was especially active, regularly producing CMEs, however? A planet regularly bombarded by these ejections might lose its atmosphere entirely, leaving behind a barren uninhabitable world, despite its orbit being ‘just right’.

Kuulkers adds that the study’s results also contain lessons for our own Solar System. “Why is there still life on Earth despite the violent material being thrown at us?” he asks. “It is because we are safeguarded by our atmosphere.”

Seeking more data

The ASTRON team’s next step will be to look for more stars like StKM 1-1262, which Kuulkers agrees is a good idea. “The more events we can find, the more we learn about CMEs and their impact on a star’s environment,” he says. Additional observations at other wavelengths “would help”, he adds, “but we have to admit that events like the strong one reported on in this work don’t happen too often, so we also need to be lucky enough to be looking at the right star at the right time.”

For now, the ASTRON researchers, who report their work in Nature, say they have reached the limit of what they can detect with LOFAR. “The next step is to use the next generation Square Kilometre Array, which will let us find many more such stars since it is so much more sensitive,” Callingham tells Physics World.

The post Astronomers observe a coronal mass ejection from a distant star appeared first on Physics World.

Silver iodide crystals have long been used to “seed” clouds and trigger precipitation, but scientists have never been entirely sure why the material works so well for that purpose. Researchers at TU Wien in Austria are now a step closer to solving the mystery thanks to a new study that characterized surfaces of the material in atomic-scale detail.

“Silver iodide has been used in atmospheric weather modification programs around the world for several decades,” explains Jan Balajka from TU Wien’s Institute of Applied Physics, who led this research. “In fact, it was chosen for this purpose as far back as the 1940s because of its atomic crystal structure, which is nearly identical to that of ice – it has the same hexagonal symmetry and very similar distances between atoms in its lattice structure.”

The basic idea, Balajka continues, originated with the 20^th-century American atmospheric scientist Bernard Vonnegut, who suggested in 1947 that introducing small silver iodide (AgI) crystals into a cloud could provide nuclei for ice to grow on. But while Vonnegut’s proposal worked (and helped to inspire his brother Kurt’s novel Cat’s Cradle), this simple picture is not entirely accurate. The stumbling block is that nucleation occurs at the surface of a crystal, not inside it, and the atomic structure of an AgI surface differs significantly from its interior.

A task that surface science has solved

To investigate further, Balajka and colleagues used high-resolution atomic force microscopy (AFM) and advanced computer simulations to study the atomic structure of 2‒3 nm diameter AgI crystals when they are broken into two pieces. The team’s measurements revealed that the surfaces of both freshly cleaved structures differed from those found inside the crystal.

More specifically, team member Johanna Hütner, who performed the experiments, explains that when an AgI crystal is cleaved, the silver atoms end up on one side while the iodine atoms appear on the other. This has implications for ice growth, because while the silver side maintains a hexagonal arrangement that provides an ideal template for the growth of ice layers, the iodine side reconstructs into a rectangular pattern that no longer lattice-matches the hexagonal symmetry of ice crystals. The iodine side is therefore incompatible with the epitaxial growth of hexagonal ice.

“Our works solves this decades-long controversy of the surface vs bulk structure of AgI, and shows that structural compatibility does matter,” Balajka says.

Difficult experiments

According to Balajka, the team’s experiments were far from easy. Many experimental methods for studying the structure and properties of material surfaces are based on interactions with charged particles such as electrons or ions, but AgI is an electrical insulator, which “excludes most of the tools available,” he explains. Using AFM enabled them to overcome this problem, he adds, because this technique detects interatomic forces between a sharp tip and the surface and does not require a conductive sample.

Another problem is that AgI is photosensitive and decomposes when exposed to visible light. While this property is useful in other contexts – AgI was a common ingredient in early photographic plates – it created complications for the TU Wien team. “Conventional AFM setups make use of optical laser detection to map the topography of a sample,” Balajka notes.

To avoid destroying their sample while studying it, the researchers therefore had to use a non-contact AFM based on a piezoelectric sensor that detects electrical signals and does not require optical readout. They also adapted their setup to operate in near-darkness, using only red light while manipulating the Ag to ensure that stray light did not degrade the samples.

The computational modelling part of the work introduced yet another hurdle to overcome. “Both Ag and I are atoms with a high number of electrons in their electron shells and are thus highly polarizable,” Balajka explains. “The interaction between such atoms cannot be accurately described by standard computational modelling methods such as density functional theory (DFT), so we had to employ highly accurate random-phase approximation (RPA) calculations to obtain reliable results.”

Highly controlled conditions

The researchers acknowledge that their study, which is detailed in Science Advances, was conducted under highly controlled conditions – ultrahigh vacuum, low pressure and temperature and a dark environment – that are very different from those that prevail inside real clouds. “The next logical step for us is therefore to confirm whether our findings hold under more representative conditions,” Balajka says. “We would like to find out whether the structure of AgI surfaces is the same in air and water, and if not, why.”

The researchers would also like to better understand the atomic arrangement of the rectangular reconstruction of the iodine surface. “This would complete the picture for the use of AgI in ice nucleation, as well as our understanding of AgI as a material overall,” Balajka says.

The post Scientists explain why ‘seeding’ clouds with silver iodide is so efficient appeared first on Physics World.

A proposed new way of defining the standard unit of electrical resistance would do away with the need for strong magnetic fields when measuring it. The new technique is based on memristors, which are programmable resistors originally developed as building blocks for novel computing architectures, and its developers say it would considerably simplify the experimental apparatus required to measure a single quantum of resistance for some applications.

Electrical resistance is a physical quantity that represents how much a material opposes the flow of electrical current. It is measured in ohms (Ω), and since 2019, when the base units of the International System of Units (SI) were most recently revised, the ohm has been defined in terms of the von Klitzing constant h/e², where h and e are the Planck constant and the charge on an electron, respectively.

To measure this resistance with high precision, scientists use the fact that the von Klitzing constant is related to the quantized change in the Hall resistance of a two-dimensional electron system (such as the one that forms in a semiconductor heterostructure) in the presence of a strong magnetic field. This quantized change in resistance is known as the quantum Hall effect (QHE), and in a material like GaAs or AlGaAs, it shows up at fields of around 10 Tesla. Generating such high fields typically requires a superconducting electromagnet, however.

A completely different approach

Researchers connected to a European project called MEMQuD are now advocating a completely different approach. Their idea is based on memristors, which are programmable resistors that “remember” their previous resistance state even after they have been switched off. This previous resistance state can be changed by applying a voltage or current.

In the new work, a team led by Gianluca Milano of Italy’s Istituto Nazionale di Ricerca Metrologia (INRiM); Vitor Cabral of the Instituto Português da Qualidade; and Ilia Valov of the Institute of Electrochemistry and Energy Systems at the Bulgarian Academy of Sciences studied a device based on memristive nanoionics cells made from conducting filaments of silver. When an electrical field is applied to these filaments, their conductance changes in distinct, quantized steps.

The MEMQuD team reports that the quantum conductance levels achieved in this set-up are precise enough to be exploited as intrinsic standard values. Indeed, a large inter-laboratory comparison confirmed that the values deviated by just -3.8% and 0.6% from the agreed SI values for the fundamental quantum of conductance, G₀, and 2G₀, respectively. The researchers attribute this precision to tight, atomic-level control over the morphology of the nanochannels responsible for quantum conductance effects, which they achieved by electrochemically polishing the silver filaments into the desired configuration.

A national metrology institute condensed into a microchip

The researchers say their results are building towards a concept known as an “NMI-in-a-chip” – that is, condensing the services of a national metrology institute into a microchip. “This could lead to measuring devices that have their resistance references built-in directly into the chip,” says Milano, “so doing away with complex measurements in laboratories and allowing for devices with zero-chain traceability – that is, those that do not require calibration since they have embedded intrinsic standards.”

Yuma Okazaki of Japan’s National Institute of Advanced Industrial Science and Technology (AIST), who was not involved in this work, says that the new technique could indeed allow end users to directly access a quantum resistance standard.

“Notably, this method can be demonstrated at room temperature and under ambient conditions, in contrast to conventional methods that require cryogenic and vacuum equipment, which is expensive and require a lot of electrical power,” Okazaki says. “If such a user-friendly quantum standard becomes more stable and its uncertainty is improved, it could lead to a new calibration scheme for ensuring the accuracy of electronics used in extreme environments, such as space or the deep ocean, where traditional quantum standards that rely on cryogenic and vacuum conditions cannot be readily used.”

The MEMQuD researchers, who report their work in Nature Nanotechnology, now plan to explore ways to further decrease deviations from the agreed SI values for G₀ and 2G₀. These include better material engineering, an improved measurement protocol, and strategies for topologically protecting the memristor’s resistance.

The post Memristors could measure a single quantum of resistance appeared first on Physics World.